Tamiya 1/10 RC F104 ver.II Pro Chassis Kit - F104V.2 #58534  [58534]

• The newest F104 version II framework incorporates a Pivot Ball Link Rear Suspension (PBLR) just like the one located on the RM-01 framework. Compared to the past 3-point T-bar rear suspension system system, this new setup allows more accurate changes of chassis' pitch and roll faculties. In addition, the PBLR suspension system features a center pivot ball, an aluminum pitch damper to temper chassis pitch motion, and an aluminum roll damper and part links to regulate chassis roll. The brand new design also increases overall traction and provides greater high speed cornering capability. The proven F104 front suspension system remain intact, which features master pin coil springs for the suspension system arranged.

The next Hop-Up choices are within the kit:

• 3mm Carbon Fiber Lower Deck
• 3mm Carbon dietary fiber lower brace
• 3mm Carbon Fiber body-mount dish
• 2mm Carbon Fiber Upper Deck (front/rear)
• 3x35 Aluminum Turnbuckle Shafts (blue) x2
• Brand new Aluminum Diff housing (uses TRF417 diff bands)
• Item 54342 RM-01 Aluminum Roll Damper set
• Item 54341 RM-01 Aluminum Pitch Damper set
• Item 54240 F104 Clamp Type Wheel hub
• Item 54209 5x5mm Aluminum Hex Head Ball Connector (fluorine coated)
• Item 54202 F104 Aluminum Upper Suspension Mount
• Item 54161 F104 Minimal Friction Suspension Ball Set
• Item 54159 Aluminum Horn for Hi-torque servo saver (F104)
• Item 53900 04 Module Spur Gear Set (93T/104T)
• Item 53601 Low Friction 5mm Adjuster (8pcs.)
• Item 53599 Fluorine Coated 5mm Aluminum Ball Connector (10pcs.)
• Item 51000 Hi-Torque Servo Saver (black colored)
• Item 50509 F1 Front Spring Set

Specs and Features:

• Scale: 1/10 scale
• Construction type: set up kit
• Terrain usage: on-road
• Drive-train: 2WD
• Drive type: pinion to spur gear
• Drive line: solid axle
• Differential kind: ball stress dish
• Suspension: PBLR (Pivot Ball Link Back Suspension)
• Steering procedure: direct servo
• Shock damper: oil-filled damper
• Shock damper material: aluminum
• Tire kind: perhaps not inluded
• Tire tread: n/a
• Body product: n/a
• ESC: perhaps not included
• ESC kind: n/a
• LED Light buckets: no
• Light-emitting Diode lights: no
• Engine kind: perhaps not included
• Bearings: shielded ball bearing
• Chassis material: carbon fiber plate
• Sticker product: n/a
• Internal gear ratio:
• Adjustable camber: front only
• Adjustable toe angles: front just
• Adjustable trip height: yes
• Adjustable gear ratio: yes
• Adjustable wheelbase: yes
• Adjustable track width: fixed
• Adjustable shock angle: yes
• Anti-squat modification: n/a
• Droop modification: n/a
• Special features: 3.0 mm carbon framework
• Requires: 7.2 battery, charger
• Needs: polycarbonate paint
• Requires: radio gear, servo, receiver
• Requires: wheels, tires, body set, motor, esc