3Racing SAK-D651/WH Sakura D6 Sport Spare Gear Set White  [SAK-D651/WH]

3RACING KIT-SAKURA D6 SPORT M1.2 x 14 x 34mm_11T (2 pcs)_White - SAK-D651/WH
Price:
AUD$5.81
Brand:
3Racing
Model:
SAK-D651/WH
Condition:
Brand New
Write a review

Compact Gear Upgrade for Sakura D6

The 3Racing SAK-D651/WH spare gear set is made for the Sakura D6 Sport and gives a convenient parts swap for maintenance or minor upgrades. Each of the two white gears is M1.2 x 14 x 34mm and has 11 teeth to match the D6 drivetrain geometry.

Performance Under Load

From 3Racing, these gears are intended to deal with standard racing stress and recreational use. The consistent tooth profile supports steady torque transfer, which helps protect bearings and adjacent gears during spirited driving.

Quick Installation Notes

These gears are intended for direct fit on the Sakura D6 Sport chassis. Install with standard RC service tools, verify gear mesh and rotation by hand, and you will be back on the track quickly.

Do I need threadlocker on the screws?

Light use of medium strength threadlocker is recommended on metal-to-metal screws to prevent loosening, but avoid applying it to plastic threads that require future removal.

Will changing gears affect top speed?

These are a like-for-like replacement so top speed should remain unchanged. They are sized to preserve the original gear ratio and drivetrain behaviour.

Can I run them in wet conditions?

The gears will function when damp, but prolonged exposure to water and grit accelerates wear. Clean and dry the gearbox after wet runs to prolong life.

Copyright © 2008-2025 rcjaz.com.au All rights reserved