Factory Pro FP-A-SS1012 10x12mm Shim Set 30-Pack  [FP-A-SS1012]

Price:
AUD$10.28
Brand:
Factory Pro
Model:
FP-A-SS1012
Condition:
Brand New
Write a review

Precision Spacing with Factory Pro FP-A-SS1012

The Factory Pro FP-A-SS1012 provides a selection of 10x12mm shims in three thicknesses to help you dial in component clearances. These flat shims are ideal when small adjustments make a big difference to handling.

Where to Use These Shims

Use them for fine tuning pinion spacing, packing bearings or setting suspension pickups. Their straightforward design makes them easy to fit and remove during iterative setup sessions.

Quantity and Practical Advice

Each pack has ten shims of 0.1mm, ten of 0.2mm and ten of 0.3mm, so you have spares for multiple builds. Keep a selection in your tool kit for quick fixes and consistency across service routines.

Will these shims affect drivetrain wear?

When used correctly to achieve proper mesh, shims reduce excessive movement and can lower wear. Avoid overpacking which can increase load on bearings and gears.

Is there a recommended order for trying shim sizes?

Try the 0.1mm shim first, then step up to 0.2mm or 0.3mm as required. Record successful combinations so you can repeat setups across vehicles.

Can I use these on foam or plastic parts?

They are best suited to metal or hard plastic mounting points. If fitting to softer materials, use care to avoid crushing the shim or deforming the mating surface.

Copyright © 2008-2025 rcjaz.com.au All rights reserved