Kyosho 96433 13T Pinion - Durable Spare for FW Models  [KY-96433]

Price:
AUD$2.97
Brand:
Kyosho
Model:
KY-96433
GTIN:
4955439676523
Condition:
Brand New
Available in warehouse
Write a review

Durable pinion for FW drive systems

The Kyosho 96433 - Pinion Gear (13T) is built as a spare part for FW06 and other FW Series models. The 13-tooth pinion supports steady torque transfer from the motor into the drivetrain for predictable handling on varied surfaces.

Model compatibility overview

This pinion is matched to the FW Series gear geometry and motor mounting. If you plan to use it on a different chassis, check shaft type and tooth dimensions to confirm it will seat correctly.

Practical installation pointers

Set a light gear mesh when fitting the Kyosho 13T pinion to avoid premature wear. Tighten mounts while monitoring mesh, and replace the gear when tooth wear becomes apparent to protect the spur and motor gear.

Is shaft adapter needed for some motors?

Some aftermarket motors use different shaft sizes; if the pinion does not slide on, a compatible adapter or different pinion may be needed. Confirm motor shaft specs before purchase.

Can I run this pinion without lubrication?

Pinions typically run dry, but keeping the gear area free of grit helps longevity. On some setups a light, gear-safe lubricant can reduce noise, but avoid heavy greases that attract dirt.

Will changing pinion size affect gearing?

Yes, altering pinion teeth changes the overall gear ratio. More teeth raise top speed and reduce acceleration; fewer teeth increase acceleration but lower top speed. Adjust spur size accordingly when tuning.

Copyright © 2008-2025 rcjaz.com.au All rights reserved