Kyosho LA236-13B 1.3mm Tune Bar for ZX-5 and TF-5  [KY-LA236-13B]

Kyosho LA236-13B - Stabilizer Bar (1.3)(ZX-5/TF-5)
Price:
AUD$7.79
Brand:
Kyosho
Model:
KY-LA236-13B
Condition:
Brand New
Quantity Discount
Unit Price You Save
2 $7.19 each $1.19 or 8%
3+ $6.84 each $2.85 or 12%
Write a review

Performance Tune Bar for ZX-5 and TF-5 Chassis

The Kyosho LA236-13B 1.3mm stabilizer bar is a bolt-in option for ZX-5 and TF-5 cars that tightens handling and steadies the chassis under cornering loads. It is aimed at drivers wanting a predictable balance between roll control and traction.

How the 1.3mm Diameter Affects Handling

The LA236-13B delivers added roll resistance without making the suspension unforgiving. Its 1.3mm dimension is chosen to give a measured increase in stiffness that helps maintain tyre contact during cornering while preserving mid-corner compliance.

Practical Fitting Tips

Install the bar with correct orientation and torque so it turns freely in its mounts. Check linkage play after a few runs and re-tighten hardware if needed to keep the setup consistent from practice to race day.

Remark :
Due to limited stock availability, please notice that some Kyosho items may have to order from the factory and the ready time is around 4-6 weeks. Customer purchases the item is assumed to accept the waiting time which allows us to order directly from the manufacturer if the item is out of our warehouse.
Yes, expect crisper turn-in and reduced body roll. The effect is most noticeable on higher speed corners where roll previously unloaded the tyres.
Use the OEM mounting screws and check that bushings sit correctly. Thread locker on metal-to-metal fasteners can help prevent loosening from vibration.
After fitting, re-evaluate camber and toe and make small suspension tweaks. Often less sway combined with camber adjustments yields better overall balance.

Copyright © 2008-2025 rcjaz.com.au All rights reserved