Tamiya 70165 High Density Styrene Board 10mm B4 Hobby Sheet - Off-Road Friendly  [70165]

Tamiya 70165 - High Density Styrene Board - 10mm thick B4 size 1pc
Price:
AUD$9.93
Brand:
Tamiya
Model:
70165
Condition:
Brand New
Write a review
alt="Tamiya 70165 - High Density Styrene Board - 10mm thick B4 size 1pc" title="Tamiya 70165 - High Density Styrene Board - 10mm thick B4 size 1pc"
alt="Tamiya 70165 - High Density Styrene Board - 10mm thick B4 size 1pc" title="Tamiya 70165 - High Density Styrene Board - 10mm thick B4 size 1pc"

Reliable Styrene Panel for RC Work

The Tamiya High Density Styrene Board in 10mm B4 format provides a dependable panel for hobbyists fabricating custom RC bodywork or chassis components. Its consistent thickness helps when producing repeatable parts.

Shaping and Tool Guide

Trim the board with a jigsaw for rough cuts and finish edges with a hobby knife for cleaner lines. A pin vice is handy for small holes and alignment marks when fitting parts together.

Colouring and Paint Tips

The surface accepts Tamiya acrylics, enamels, and common paint markers. For best results, degrease and lightly sand before priming to ensure a smooth, even coat that holds up to handling.

Can I use this board for exterior body panels?

It is fine for cosmetic panels and sheltered exterior use, but prolonged exposure to sun, heat or rain can affect shape and finish. Apply suitable sealers if parts will see weather.

What is the easiest way to get clean edges?

Score lines with a sharp blade before snapping for straight edges, or use a fine jigsaw blade and follow up with sanding for smooth results. Take several light passes rather than forcing one heavy cut.

How do I prevent paint from peeling?

Clean the surface, sand lightly, and use an adhesion primer compatible with styrene. Allow adequate drying time between coats and avoid handling until fully cured.

Copyright © 2008-2025 rcjaz.com.au All rights reserved