Tamiya 9335777 Idler Gear - Performance Part for Konghead 6x6 G6-01  [9335777]

Tamiya 9335777 - Idler Gear: 58646 1/18 Konghead 6x6 G6-01 - 19335777
Price:
AUD$21.73
Brand:
Tamiya
Model:
9335777
GTIN:
1852888854584
Condition:
Brand New
Available in warehouse
Write a review
alt="Tamiya 9335777 - Idler Gear: 58646 1/18 Konghead 6x6 G6-01 - 19335777" title="Tamiya 9335777 - Idler Gear: 58646 1/18 Konghead 6x6 G6-01 - 19335777"

Precision idler for off road Konghead setups

The Tamiya 9335777 idler gear is an important transmission component for the 1/18 Konghead 6x6 G6-01 chassis. It helps keep torque flowing smoothly, especially when tackling rough ground or loose surfaces.

Compatibility and gear engagement

This idler is made to fit the Konghead 6x6 G6-01 exactly, giving correct tooth profile and spacing for reliable engagement. Correct mesh reduces noise and helps prevent premature tooth damage during hard use.

Fitting tips for tough conditions

Before fitting the Tamiya 9335777 idler gear clean all parts and check shafts for wear. Set gear mesh with care, secure fasteners, and test on low throttle to confirm smooth rotation before full running.

Is this idler suited for dusty or sandy runs?

It is suitable for off road use but make sure to seal or clean bearings after dusty sessions. Regular maintenance will prevent grit from abrading gear teeth and bearings.

Should I change gear mesh for heavy duty use?

Yes, set a slightly tighter but safe mesh to reduce backlash when under load, but avoid overtightening which can cause binding and excess wear.

How do I inspect for early signs of damage?

Look for missing or rounded teeth, uneven wear patterns, or wobble on the shaft. Replace the idler if you see any of these to protect the rest of the gearbox.

Copyright © 2008-2025 rcjaz.com.au All rights reserved