Yokomo B10-008FGA Graphite Front Arm for BD10 - Track Ready  [B10-008FGA]

Yokomo B10-008FGA Graphite molded front lower suspension arm (55mm-Shock33mm) for BD10
Price:
AUD$20.20
Brand:
Yokomo
Model:
B10-008FGA
GTIN:
0639342202355
Condition:
Brand New
Write a review

Track-Oriented Yokomo B10-008FGA Front Lower Arm

The Yokomo B10-008FGA Graphite Front Lower Suspension Arm is built to sharpen BD10 handling on the asphalt. Its graphite construction delivers greater hardness than standard arms, helping to reduce unwanted flex and enhance steering precision.

Pin Spacing and Chassis Matches

This part uses a 55mm distance between suspension pins and a 33mm span from the inner suspension pin to the shock pivot, matching BD10 layout for a direct fit. It is suitable for multiple BD10 model variations and tuned rigs.

Suitable Models

  • MRTC-BD10
  • MRTC-BD10A
  • MRTC-BD10FF
  • MRTC-BD10LC
  • MRTC-BD10LCA
  • MRTC-BD10LCR
  • MRTC-BD10LCRA
  • RSR-010
  • RSR-LFGT3RTR
Remark :
Due to limited stock availability, please notice that some Yokomo items may have to order from the factory and the ready time is around 4-6 weeks. Customer purchases the item is assumed to accept the waiting time which allows us to order directly from the manufacturer if the item is out of our warehouse.

Does the arm affect toe or camber settings?

The arm itself preserves the stock mounting points, so initial toe and camber values should stay similar. Fine tuning may be needed once the car is driven to account for the stiffer behaviour.

Can I run this with stock shocks?

Yes, the arm is compatible with standard BD10 shock layouts. Adjust damper settings if the suspension feels harsher after installing the stiffer arm.

How often should I inspect the part?

Check the arm after every heavy session or impact. Look for hairline cracks or excessive wear around pin holes and replace if any damage is found.

Copyright © 2008-2025 rcjaz.com.au All rights reserved