1/10 Buggy Rear-Right Rim for Setup Tuning Serpent SER214015 White  [SER214015]

Technical notes for a rear-right 1/10 rim

This Serpent SER214015 rim serves as a rear-right replacement for 1/10 off-road buggies. The white rim offers a direct-fit option where the vehicle's wheel mounting matches the rim's design.

The emphasis here is on installation procedure and the rim's effect on handling. Rim offset and tyre seating change scrub radius and lateral tyre placement; these variables feed directly into how the rear end transfers power and reacts in corners.

Fitment checklist: confirm hub hex diameter and the stack height of nuts and washers before fitting, mount the tyre with even bead seating to reduce imbalance, and observe the rr marking for correct orientation. Apply correct torque to wheel hardware and verify suspension and body clearance through full travel.

Setup impact: swapping rim offsets is a practical technique for altering rear grip and rotation. Even modest offset shifts can move the tyre contact patch and change corner exit behaviour. Combine rim selection with tyre compound, ride height, and shock tuning to reach predictable handling.

Aftercare tips: inspect the bead area and rim for damage after sessions, clean mating surfaces prior to glueing, and balance wheels if you detect vibration at higher speeds.