1/10 Drift Body for On-Road Tuning - Yokomo YOKSD430BS SC430 Style  [YOKSD430BS]

Yokomo SD-430BS - 1/10 Drift Body Droop Yamasa Yokohama SC430
Price:
AUD$63.69
Brand:
Yokomo
Model:
YOKSD430BS
Please kindly input your name and email address, we will inform you once we have the restocking.
Or you may find similar product under the
category
Write a review

Shell description for 1/10 drifters

The Yokomo YOKSD430BS offers a 1/10-scale on-road drift body with SC430 lines and Droop Yamasa Yokohama livery, intended to pair with typical 1/10 drift chassis. The shell serves as a scale aerodynamic and visual component while designers and drivers dial in chassis balance.

Emphasis is on how the body affects tuning choices: check wheelbase match, tyre diameter and offset before mounting, since these variables influence arch clearance and track width. The text highlights fitting strategy and the role the shell plays in setup rather than paint alone.

Fitting notes: use the shell to confirm suspension travel and steering sweep, trimming arches where necessary. When decorating, select paints and adhesives safe for polycarbonate constructions and follow standard masking and curing steps.

Specifications

  • Item: 1/10 drift body set, SC430 Droop Yamasa Yokohama styling
  • Model Number: YOKSD430BS
  • Material: Not specified by source
  • Compatibility: 1/10 on-road drift chassis

As a tuning-aware shell, this option complements standard 1/10 drift platforms; confirm fitment during setup to maintain intended handling and to avoid tyre clearance issues.
Remark :
Due to limited stock availability, please notice that some Yokomo items may have to order from the factory and the ready time is around 4-6 weeks. Customer purchases the item is assumed to accept the waiting time which allows us to order directly from the manufacturer if the item is out of our warehouse.

How does the YOKSD430BS influence centre of gravity and handling?

While lightweight, the shell's mass distribution can alter aerodynamic flow and slight balance; consider ballast or suspension tweaks after fitting to re-establish desired handling.

Do I need to trim for wider tyres or deeper offsets?

Yes, wider tyres or different wheel offsets often require arch trimming; trial-fit wheels and mark required clearances before cutting to avoid mistakes.

Can the shell be used to test aerodynamic changes?

Use the shell to assess how body shape affects airflow at speed; small changes in mounting height and rake can produce noticeable on-track differences.

Is special equipment required for accurate mounting?

No special tools are needed; use a ruler, masking tape and a fine drill for precise post placement, and perform a dry-fit to confirm alignment before final mounting.

Copyright © 2008-2026 rcjaz.com.au All rights reserved