13mm Pink Shock Spring, 3.6lbs - Serpent 500907  [SER500907]

Price:
AUD$0.00
Brand:
Serpent
Model:
SER500907
Please kindly input your name and email address, we will inform you once we have the restocking.
Or you may find similar product under the
category
Write a review

Durability and performance notes

This Serpent 500907 spring is specified as a 13mm coil with a 3.6lbs rate and pink finish, suitable for a variety of R/C shock assemblies. It is intended to function as a replacement spring where 13mm coils are required.

Installation notes: place the spring onto the shock shaft and seat it on the retainer consistent with your shock design, confirm there is no lateral movement or interference, and fine-tune preload to achieve balanced ride height.

Tuning role: a 3.6lbs spring raises stiffness, improving stability and controlling high-speed compressions; balance spring rate changes with damping and ride height for best results.

Do these springs help reduce body roll?

Yes, increasing spring rate to 3.6lbs generally limits body roll and improves chassis response, though overall grip will depend on surface and damping setup.

Are special retainers required for these springs?

Most shocks designed for 13mm springs will accept them using standard retainers; verify retainer and shaft compatibility before fitting.

How do I preserve the spring finish during use?

Avoid abrasive contact during installation, wipe off grit after running, and inspect for chips to keep the pink finish intact and prevent corrosion.

Copyright © 2008-2026 rcjaz.com.au All rights reserved