1969 Chevy Camaro Z/28 Non-Decor Body for Fazer MK2 FW06 - 200mm / 260mm - Kyosho 39217B  [KY-39217B]

Kyosho 39217B - 1969 Chevy Camaro Z/28 NonDecorationBody
Price:
AUD$105.70
Brand:
Kyosho
Model:
KY-39217B
GTIN:
4548565471805
Please kindly input your name and email address, we will inform you once we have the restocking.
Or you may find similar product under the
category
Write a review

Blank 1969 Camaro Z/28 Body for 200mm Touring Cars

The Kyosho 39217B clear body is an unpainted, non-decoration shell built for 200mm width touring setups that use a 260mm wheelbase. The sculpted profile reproduces the 1969 Chevy Camaro Z/28 at model scale and is supplied clear to enable bespoke paint and trim work.

Light buckets are supplied to accept optional lamps, and the bodyshell can be wired for LEDs when fitted with compatible LED components and harnesses sold separately. It is prepared for hobby trimming and mounting onto compatible chassis such as Fazer MK2 and FW06.

Specifications

  • Item: Kyosho 39217B - 1969 Chevy Camaro Z/28 NonDecorationBody
  • Material: Not specified
  • Model Number: 39217B
  • Compatibility: 200mm width bodies, 260mm wheelbase chassis such as Fazer MK2, FW06

Ideal for hobbyists who want to paint, fit lighting, or trial mount a classic Camaro shell on a 1/10 touring chassis sized to 200mm width and 260mm wheelbase.
Remark :
Due to limited stock availability, please notice that some Kyosho items may have to order from the factory and the ready time is around 4-6 weeks. Customer purchases the item is assumed to accept the waiting time which allows us to order directly from the manufacturer if the item is out of our warehouse.

Can I install LED headlights easily?

Yes. The included light buckets make fitting LEDs straightforward, but you will need to supply compatible LED modules and route wiring through drilled holes or slots.

What painting approach works best?

Use polycarbonate paints and thin coats, masking off windows and buckets first. Allow proper drying between coats to avoid runs on the clear plastic.

Do I need special tools to trim this body?

A sharp body knife, straight edge and fine files are recommended for clean edges; sanding the cut areas lightly helps paint adhesion later.

Is internal padding necessary for LEDs?

Padding and small brackets help secure LEDs and prevent vibration; fit these before final wiring and mounting to maintain neat internal routing.

Copyright © 2008-2026 rcjaz.com.au All rights reserved