350cst Silicone Shock Fluid 110ml for RC Shocks - Arrowmax am-210037  [am-210037]

Arrowmax Silicone Shock Fluid 110ml 350cst
Price:
AUD$0.00
Brand:
Arrowmax
Model:
am-210037
Please kindly input your name and email address, we will inform you once we have the restocking.
Or you may find similar product under the
category
Write a review

Tuning-grade 350cst silicone shock oil

The Arrowmax am-210037 Silicone Shock Fluid comes in a 110ml bottle and is specified at 350cst for use in RC shock absorbers. This product is provided for hobbyists to top up and fine-tune model car suspension assemblies, not as original equipment from model manufacturers.

Higher centistoke fluids deliver slower damping and greater resistance on both compression and rebound strokes. A 350cst oil is a useful option when moving to firmer setups, offering stable control without excessively sluggish response on small shock components.

To replace fluid, drain the existing oil, clean internal parts, refill with the 350cst solution, and cycle the shock to purge air. After reassembly, confirm seal integrity and spring preload so the suspension returns consistent results during testing.

Start with baseline settings, then fit 350cst Arrowmax am-210037 fluid to increase damping firmness. Test in short runs to assess understeer or oversteer changes and adjust spring rates or preload accordingly for balanced handling.
Mixing viscosities is a common tuning method to reach intermediate damping. Record mixture ratios and trial them on the vehicle so you can replicate the desired response at events.
Yes, expect slower rebound and firmer compression. Evaluate rebound speed and, if needed, reduce spring preload or alter pistons to fine-tune the resulting behaviour.
Perform short controlled runs, compare lap times and handling feel, and change one variable at a time. Log each change so you can backtrack to the best-performing configuration quickly.

Copyright © 2008-2026 rcjaz.com.au All rights reserved