XRAY 352432 Front 3.2mm Anti-Roll Bar Race Spec for XT9  [XR-352432]

XRAY 352432 Front Anti-Roll Bar 3.2mm
Price:
AUD$15.04
Brand:
XRAY
Model:
XR-352432
Condition:
Brand New
Write a review

Set Up Your XT9 with the XRAY 3.2mm Front Anti-Roll Bar

The XRAY 352432 front anti-roll bar increases front rigidity on XT9 chassis by using a 3.2mm bar to resist roll. This modification helps keep the chassis flatter and maintains consistent tyre contact during aggressive driving.

Performance Impact of 3.2mm Stiffness

Using a 3.2mm front bar improves resistance to roll forces, which can sharpen steering response and stabilise the car through the middle of a corner. It is a straightforward tuning option for refining front grip.

Practical Fitting Advice

Mounting the XRAY 352432 requires only common RC tools and basic attention to link geometry. After fitting, cycle the suspension to confirm smooth movement and no binding points.
Remark :
Due to limited stock availability, please notice that some XRAY items may have to order from the factory and the ready time is around 4-6 weeks. Customer purchases the item is assumed to accept the waiting time which allows us to order directly from the manufacturer if the item is out of our warehouse.

Is special hardware required to fit the XRAY 352432?

No special hardware is typically necessary; the bar uses standard linkage mounts. Keep original spacers and check for correct endlink alignment when fitting.

Does this bar suit loose or high-grip tracks better?

A stiffer front bar like the 3.2mm option is often beneficial on high-grip surfaces to control roll, while on very loose surfaces you may prefer a softer front setup to retain mechanical grip.

Any maintenance tips for long term use?

Regularly check endlink threads and bar pivot points for wear or looseness, and replace any worn links to preserve predictable handling.

Copyright © 2008-2025 rcjaz.com.au All rights reserved