Sold under the O.S. Engine OS23102000 reference, this crankshaft is intended for the 35AX family and is used during engine overhauls and performance tuning. The notes that follow highlight fit, installation technique, and the crankshaft's role in engine function for RC models.
The crankshaft converts piston reciprocation into rotational torque within the engine case and should be treated as a precision rotating assembly. Before installation verify the OS23102000 model number against your engine's castings and internal arrangements to ensure correct bearing seating and connecting rod fit.
Installation tips: ensure mating surfaces are clean, check running clearances, replace seals and bearings as appropriate, and tighten fasteners to the torque values specified in the manual. After assembly perform a careful break-in and re-check endplay and rotation smoothness.
Tuning note: although a crankshaft does not alter ignition or fuel calibration directly, imbalance or improper fit will produce vibration and can change perceived engine responsiveness and component life, so crank condition is a key diagnostic point when tuning.
Maintain cleanliness when handling the OS23102000 crankshaft, confirm correct seating with the case and bearings, and monitor rotation and endplay during initial runs to achieve reliable model performance.
Copyright © 2008-2026 rcjaz.com.au All rights reserved
