36-Tooth Hardened 48-Pitch Pinion for RC Tuning Yokomo YOKPG4836  [YOKPG4836]

Yokomo PG-4836 - 48 Pitch 36 Teeth Super Hard Precision Pinion Gear
Price:
AUD$12.45
Brand:
Yokomo
Model:
YOKPG4836
Please kindly input your name and email address, we will inform you once we have the restocking.
Or you may find similar product under the
category
Write a review

Hardened 36T 48-Pitch Pinion for Precision Use

The Yokomo YOKPG4836 pinion is a 36-tooth, 48-pitch component made for electric model drivetrains. Its super-hard finish and tight machining tolerances are intended to sustain reliable meshing with compatible 48-pitch spur gears under normal operating conditions.

Use this pinion to achieve small, controlled changes in gear ratio when tuning for acceleration, top speed, or motor load. It serves as a straightforward replacement or upgrade where a 36-tooth pinion is required to hit the desired gear ratio.

Practical installation advice: confirm the pinion bore fits your motor shaft or choose the correct adaptor, set proper mesh before fully tightening, and verify gear face alignment to reduce uneven wear. After fitting, rotate the drivetrain manually under light load to ensure smooth operation.

Information here emphasizes fitment, material hardness, and tuning role rather than promotional claims; treat the part as an aftermarket interchange option for 48-pitch systems.
Remark :
Due to limited stock availability, please notice that some Yokomo items may have to order from the factory and the ready time is around 4-6 weeks. Customer purchases the item is assumed to accept the waiting time which allows us to order directly from the manufacturer if the item is out of our warehouse.

How does the hard finish affect durability?

The hardened surface helps resist wear under typical loads, but correct mesh and alignment remain critical to maximize life span.

Can I use this pinion with high-power brushless setups?

It is compatible with 48-pitch systems, but ensure your drivetrain, bearings, and motor pinion fitment are rated for the motor's power to avoid premature wear.

What checks should I perform after fitting?

Verify mesh under the intended gearbox conditions, listen for binding or backlash, and run a short low-load trial to confirm smooth engagement.

Copyright © 2008-2026 rcjaz.com.au All rights reserved