3Racing 3RAC-PG6452 64 Pitch 52T Pinion Gear 7075 Aluminium [3RAC-PG6452]

3RACING 64 Pitch Pinion Gear 52T (7075 w/ Hard Coating) - 3RAC-PG6452

Price:

AUD$5.70

Brand:

3Racing

Model:

3RAC-PG6452

Not Available

Please kindly input your name and email address, we will inform you once we have the restocking.

Or you may find similar product under the

R/C General - Gears - Pinion Gears

3Racing 64 Pitch Pinion Gear for Performance Builds

Model makers seeking robust pinion options can fit the 3Racing 64 Pitch Pinion Gear 52T, model 3RAC-PG6452, into suitable gearboxes. Constructed from 7075 aluminium and finished with a protective hard coat, this pinion is intended to give dependable tooth contact and resistance to wear. The 52 tooth count provides a practical step in gear ratio selection for both street and track setups.

7075 Aluminium Strength

7075 aluminium offers an effective combination of strength and lightness that helps the pinion resist deformation. The hard coating helps the surface stand up to abrasive wear during repeated runs.

Suited to Tuning and Race Use

When tuning final drive ratios, the 3Racing 64 Pitch Pinion Gear 52T offers predictable engagement and is straightforward to fit into 64 pitch systems. Regular checks on mesh and set screw security will keep performance consistent.

How do I set the correct mesh with this pinion?

Use a piece of paper or feeler method to establish a small clearance between pinion and spur, then tighten the motor mount and retest under slight load to confirm smooth rotation.

Can I switch from a different pitch to 64 pitch?

Changing pitch requires replacing both spur and pinion to matching 64 pitch parts. Do not mix different pitch gears as this will cause poor contact and rapid wear.