3RACING 3RAC-PG6460 64 Pitch 60T Pinion Gear Hard Coat 7075  [3RAC-PG6460]

3RACING 64 Pitch Pinion Gear 60T (7075 w/ Hard Coating) - 3RAC-PG6460
Price:
AUD$6.60
Brand:
3Racing
Model:
3RAC-PG6460
Condition:
Brand New
Write a review

Performance-Focused Pinion for 64 Pitch Systems

The 3RACING 3RAC-PG6460 64 pitch 60T pinion is a solid upgrade for hobbyists pursuing cleaner gear engagement. Built from 7075 aluminium and treated with a hard coating, it aims to reduce tooth wear while keeping rotating mass low.

Durable Alloy and Coating Combo

Combining 7075 aluminium with a hard surface treatment gives the pinion both strength and abrasion resistance. That helps maintain reliable gear contact over longer running intervals.

Applications and Tuning

Ideal for fine tuning gear ratios, this pinion works well across a range of models that use 64 pitch gearing. Adjust ratio changes incrementally to find the best balance between acceleration and top speed.

Best Practice for Installation

Correct mesh setting is crucial to avoid premature wear; adjust in small steps and confirm with a slow run. Keep the gear clean and lightly lubricated for consistent operation.

Will this upgrade reduce drivetrain noise?

When mesh is set correctly, the harder surface and precision cut can help reduce gear noise compared with worn or softer pinions.

How often should I inspect the pinion?

Check the teeth after heavy sessions or if you notice unusual noise; routine visual checks after every few runs are a good habit.

Does the hard coating affect gear matching?

The coating improves surface durability but the initial mesh should be set the same way as with uncoated pinions to ensure correct engagement.

Copyright © 2008-2025 rcjaz.com.au All rights reserved