3RACING Cero M3 x 8 x 1.5 Lower Suspension Spacer SAK-C167A Setup Shim  [SAK-C167A]

3RACING Cero M3 x 8 x 1.5 Lower Suspension Spacer - SAK-C167A
Price:
AUD$5.72
Brand:
3Racing
Model:
SAK-C167A
Condition:
Brand New
Write a review

Dial in Steering with 3RACING Lower Spacers

The 3RACING SAK-C167A M3 x 8 x 1.5 Lower Suspension Spacer is a practical tuning shim for Cero chassis owners. It lets you alter lower stack spacing to influence steering response and mid-corner attitude.

Why Use These Spacers

By adjusting the lower suspension stack, these spacers can change roll center and leverage ratios, giving you a simple way to affect turn-in and mid-corner grip without major component swaps.

Installation Tips and Fit

The standard M3 x 8 x 1.5 dimensions make fitting straightforward on compatible setups. Fit, test, and iterate with different spacer counts to find the best compromise between agility and stability.

Will adding this spacer affect traction?

Spacer changes alter geometry and can shift how weight is transferred; in many cases this improves traction in corners, but always test to confirm on your surface and tyre choice.

Is any shimming required at the top mount too?

Top mount adjustments are a separate tuning axis. Use the lower spacer first to see its effect, then consider small top mount changes if further balance is needed.

Do these spacers need threadlocker?

Use your normal hardware practice. Light threadlocker is not usually necessary on lower mount bolts unless you experience loosening in rough conditions.

Copyright © 2008-2025 rcjaz.com.au All rights reserved