KYOSHO FW-05R Front Shock Tower Graphite FW05-003 by 3Racing  [FW05-003]

Kyosho FW05-R Front Graphite Shock Tower For Kyosho FW-05R - 3RACING FW05-003
Price:
AUD$8.56
Brand:
3Racing
Model:
FW05-003
Please kindly input your name and email address, we will inform you once we have the restocking.
Or you may find similar product under the
category
Write a review

Graphite front tower tailored for FW-05R setups

This front shock tower suits the Kyosho FW-05R chassis and is identified by part number FW05-003. The graphite plate provides the mount points for the front dampers and upper shock bearings used in FW-05R configurations.

Functionally the part locates the shock tops and contributes to maintaining suspension geometry, allowing the same mounting holes used for camber and ride-height tweaks. When installing, confirm tower alignment with the front bulkhead and use the chassis original threaded holes and hardware to check seating and clearance before running the model. This entry is for an aftermarket chassis accessory aimed at setup and maintenance tasks.

A practical upgrade for owners refining front-end response.

Is this the same shape as the factory tower?

It follows the FW-05R mounting pattern but confirm the profile against your original part to ensure clearance for shocks and linkages.

Will graphite improve durability?

Graphite gives a stiff mounting surface; durability depends on use and impact exposure compared with plastic alternatives.

Should I reuse original screws?

Use the chassis threaded holes and verify screw length and engagement. Reusing original hardware is fine if it matches required length and thread condition.

Copyright © 2008-2026 rcjaz.com.au All rights reserved