KYOSHO FW05-R/FW05RR Roll Bar Rod Ends FW05-008A by 3Racing  [FW05-008A]

Roll bar rod end set for KYOSHO FW05-R/FW05RR

This roll bar rod end set provides male and female fittings tailored to KYOSHO FW05-R and FW05RR touring cars, giving a direct interface between the anti-roll bar and linkage. The parts match the original attachment points so you can swap or renew ends during setup changes without modifying the chassis.

Designed solely for scale RC suspension tuning, these pieces are not for use on real vehicles. They help control how roll forces are transferred across the suspension when cornering at speed.

Fitment advice: remove the wheel if needed and slacken the linkage to reach the roll bar connections, check existing hardware for signs of wear, then fit the male and female ends to the designated rods or bar. Move the suspension through its range by hand to confirm clearance before tightening. Apply thread locking compound only where your manual advises.

Setup guidance: swapping link ends changes the roll input path into the suspension and can influence understeer/oversteer behaviour. Introduce changes one step at a time and validate on short practice runs.