TA05 Aluminium Rear Hub Carrier 3 Degree - TA05-16/3/LB by 3Racing  [TA05-16/3/LB]

Rear hub carrier in aluminium for TA05

This aluminium rear hub carrier is made for the TA05 chassis and provides a fixed 3 degree rear cant for tuning rear geometry. The part is finished in light blue anodize and replaces the factory plastic carrier to create a stiffer mounting point for the rear hub and suspension pickup, affecting camber recovery and roll characteristics.

Installation is a routine procedure for those experienced with TA05 servicing: remove the original carrier and fit this aluminium unit using the chassis' original screws and bearings. Standard hex drivers and sockets used on TA05 models will handle the job. After installation, verify rear camber and toe and apply the recommended torque values for aluminium fasteners to avoid damaging threads.

As a tuning accessory, the carrier increases rear rigidity and refines feedback during cornering, which can alter how the car transfers load across the rear tyres during acceleration and direction change. Intended for 1/10 scale TA05 touring cars for hobby and track applications.