3Racing Traxxas Revo Front Bumper Blue RE-055/B - Upgrade Part  [RE-055/B]

Overview of the front bumper

This replacement front bumper suits 1/8 scale Traxxas Revo models and is listed under model RE-055/B. It is intended as a direct replacement to re-establish the body mount points and to absorb minor impacts during everyday hobby use.

Fitment uses standard Revo mounting locations. Remove the original bumper by removing the retaining screws, position the RE-055/B in the factory holes, and tighten with the same fasteners. Always check for adequate clearance between the body shell and steering components before finalising the fit. Slight body mount trimming may be necessary with some shells.

The bumper serves as a sacrificial element and alignment guide, helping to protect front suspension parts and keeping the factory mounting geometry for repeatable repairs and setup. After any ride-height or steering changes, confirm the bumper does not limit suspension or steering movement.

Recommended as a like-for-like spare to restore front mounting and low-speed impact protection; inspect fitment during installation.