4x5.5E FPV Prop Pack for Small Frames — APC AP04055E-B4 (2 CW, 2 CCW)  [AP04055E-B4]

APC PROPELLER 4x5.5E FPV RACING BUNDLE (2 STANDARD & 2 REVERSE ROTATION)
Price:
AUD$9.91
Brand:
APC
Model:
AP04055E-B4
Condition:
Brand New
Write a review

4x5.5E Props — Performance and Setup

The APC AP04055E-B4 propeller bundle is supplied for small-frame FPV racing and freestyle craft that require the 4x5.5E blade format. Including both rotation directions lets you tailor thrust and handling by fitting matched pairs to the appropriate motors.

This set contains two clockwise and two counterclockwise blades intended as spare or replacement parts for competition or practice. Keeping extra blades on hand speeds up repairs and lets you experiment with fresh props to find preferred throttle feel.

Installation is simple: place each prop on the motor that matches its rotation, confirm the adapter or nut fits, and ensure blades are mounted with the proper face and leading edge orientation. Inspect and replace any blade that has chips or warps to prevent imbalanced flight.

Tuning advice: changing to a new APC AP04055E-B4 set can affect low-end thrust and throttle smoothness, so hover-test in a safe area after swaps. Clean mounting surfaces and make sure props are secured firmly for consistent performance.

How will switching to fresh props change flight behavior?

New APC AP04055E-B4 blades can tighten throttle response and reduce vibration if the originals were worn. Always perform a hover test to gauge differences before aggressive flying.

Any setup tips for consistent performance?

Ensure props are clean and properly seated on the adapter, check for axial play, and balance if you notice any shaking. These steps help maintain smoother motor and flight performance.

Copyright © 2008-2026 rcjaz.com.au All rights reserved