6x4 Three-Blade Propeller Master Airscrew MA0640TE for Electric RC  [MA0640TE]

MASTER AIRSCREW 3-BLADE SERIES 6x4 PROPELLER
Price:
AUD$8.63
Brand:
Master Airscrew
Model:
MA0640TE
Condition:
Brand New
Write a review

6x4 Three-Blade Propeller Details

The Master Airscrew MA0640TE is a 3-blade 6x4 propeller intended as a spare or replacement for electric model aircraft. Three blades change thrust behavior and can affect noise and acceleration when compared to two-blade props; keep this in mind when changing propellers.

Install carefully with correct blade orientation and secure mounting hardware. Check that the prop bore fits your spinner or adaptor, tighten fasteners to recommended practice, and run a static spin test before powered operation. Regular balancing minimizes vibration transmitted to the airframe and electronics.

Tuning notes: installing a 3-blade 6x4 increases blade area and may require modest throttle mapping or gearing changes on higher output setups. Observe motor temps and current draw during testing and make gradual adjustments to maintain safe operation.

Can I replace my current two-blade prop with this 3-blade 6x4?

Yes, if the hub and shaft fit and your motor can handle the changed load. Expect different acceleration and possibly higher current draw; test gradually.

How do I fasten the prop to avoid loosening in flight?

Use the correct nut or collet for your shaft, follow torque guidance for your model, and consider threadlocker on metal threads if recommended by your airframe manual.

Best method to verify vibration levels after fitting?

Do a static balance with a prop balancer, then run an on-airframe low-throttle spin. Inspect servo operation and airframe rigidity for any signs of excess vibration.

Copyright © 2008-2026 rcjaz.com.au All rights reserved