7.4V 4000mAh 20C Intellect IP-CS2S4000V1-20C LiPo Stick Battery  [IP-CS2S4000V1-20C]

Intellect (IP-CS2S4000V1-20C) - 7.4v 20C 4000mAh Lipo Battery
Price:
AUD$47.43
Brand:
Intellect
Model:
IP-CS2S4000V1-20C
Write a review

Race-style 7.4V 4000mAh LiPo stick battery for RC

The Intellect IP-CS2S4000V1-20C is a two-cell Lithium Polymer stick pack designed for radio-controlled cars that benefit from a narrow, hard-cased battery. It supplies 7.4V at 4000mAh with a 20C discharge rating and arrives in a black protective case with a locating pin for secure installation.

Connector details: the balance lead uses an XH2.5 connector and the pack's main discharge connector is the Tamiya-style plug specified by Intellect. These connector types are standard for many chargers and vehicle harnesses, enabling straightforward integration.

Fitting guidance: install the stick pack so the hard case clears the chassis and moving parts, then secure it with the vehicle strap or clip to prevent movement. Always check connector polarity and seating before the initial power-up. Use the XH2.5 balance lead for balance charging with a LiPo-capable charger to maintain cell condition.

Setup impact: as a 4000mAh 20C stick pack, this battery targets consistent output and reasonable runtime for short to medium sessions. When tweaking handling, consider battery placement's effect on the centre of gravity and tweak suspension or weight distribution rather than swapping battery specification.

Specifications

  • Item: LiPo stick pack battery
  • Material: Lithium Polymers
  • Model Number: IP-CS2S4000V1-20C
  • Voltage: 7.4V
  • Capacity: 4000mAh
  • C Rating: 20C
  • Balance Connector: XH2.5
  • Discharge Connector: Tamiya
  • Pack Dimension: Stick pack
  • Case: Hard case with pin
  • Color: Black

Use this battery when a slim stick profile and a firm case are required; pair with chargers and wiring that accept XH2.5 balance leads and Tamiya discharge plugs for hobby track performance.

The battery is supplied with an XH2.5 balance lead; match this to your charger balance port when charging to ensure cells are balanced.
Yes, the main discharge connector is a Tamiya-style plug as specified by Intellect, commonly used in many RC setups.
The hard case offers extra protection and the locating pin aids secure mounting, but always check surrounding clearance to avoid interference with suspension or drive components.
Verify the battery label shows 7.4V 4000mAh 20C, ensure connectors match your charger and vehicle, and confirm polarity before applying charge or power.

Copyright © 2008-2026 rcjaz.com.au All rights reserved