Air & Helicopter Transmitter Futaba 6EXAP_c5 6-Channel FM 35MHz System  [6EXAP_c5]

Small, tactile six-channel flight controller

The Futaba 6EXAP_c5 is a compact 6-channel FM transmitter package intended for pilots flying on 35MHz frequencies with airplanes and helicopters. It prioritizes tactile controls and obvious switch positions so pilots can change dual rates, trims and function dials without digging through menus, and it ships with a receiver and servos to speed model commissioning.

Layout is arranged for practical field work: an aileron/elevator dual-rate switch that also swaps expo settings, a flap control dial mapped to channel 6, a retract switch for landing gear on channel 5, plus a throttle/rudder stick layout and a throttle-cut button for engine shutoff. Trims are provided for each axis, and a DATA INPUT lever with MODE and SELECT keys manage the LCD for programming and diagnostics.

Setup is straightforward: install the included R136F receiver following standard mounting guidance, hook up the four S3003 servos to the designated channels, route and fully extend the antenna for reliable signal transmission, and use the supplied charger with the transmitter charging jack to prepare the battery before flying. The trainer switch allows instructor takeover when connected to another transmitter with a trainer cord, available separately.

If you need a straightforward, field-friendly six-channel FM package, the Futaba 6EXAP_c5 gives direct switch control for trimming and dual-rate adjustments plus the receiver and servos required to fit and tune a sport or scale model quickly.