Aluminum Motor Mount Base A for Auper D6 - SAK-D6808F/BU by 3Racing  [SAK-D6808F/BU]

3RACING Auper D6 Aluminum Motor Mount Base A Blue - SAK-D6808F/BU
Price:
AUD$8.01
Brand:
3Racing
Model:
SAK-D6808F/BU
Condition:
Brand New
Write a review

Auper D6 Mount Base A - Machined Aluminum

Designed for the Auper D6 1/10 electric on-road chassis, this motor mount base secures the motor and permits accurate fore-aft and rotational adjustments so the pinion meshes correctly with the spur gear and the drivetrain stays aligned.

Installation notes: the base fastens to the Auper D6 motor block points and uses the chassis' provided mounting holes; align the motor shaft with the spur centreline, verify mesh through rotation, then tighten to specification to avoid premature wear.

Tuning role: a rigid aluminum base gives a reliable datum for repeated setup work, helping to retain consistent mesh and torque behaviour when changing motors, pinion sizes, or gear ratios during tuning sessions.

How does an aluminium base affect tuning?

A rigid mount stabilises motor position so setup changes produce predictable mesh results, making tuning adjustments more repeatable and easier to compare lap-to-lap.

Will this change my gear noise?

If mesh is set correctly, gear noise should be consistent; the aluminium mount helps keep mesh stable, which can reduce intermittent noise caused by shifting mounts.

Should fasteners be loctited?

Use threadlocker where recommended for your chassis hardware and tighten to the specified torque; avoid over-tightening which can deform parts or alter alignment.

Copyright © 2008-2026 rcjaz.com.au All rights reserved