Aluminum Motor Mount for D-Max Chassis SD-304DS - Yokomo  [SD-304DS]

Yokomo SD-304DS SPL. Aluminum Motor Mount for D-Max
Price:
AUD$21.75
Brand:
Yokomo
Model:
SD-304DS
GTIN:
3888
Please kindly input your name and email address, we will inform you once we have the restocking.
Or you may find similar product under the
Spares / Hop-ups - Yokomo - DMAX category
Write a review

Mount Design Details for D-Max

The Yokomo SD-304DS is a dedicated aluminum motor mount for the D-Max special chassis with an anodized blue finish. The layout uses a clamp motor interface plus a separate aluminum cam and spring so motor location can be reproduced reliably after removal.

Practically the component acts as a stiff anchor to maintain motor alignment with spur and pinion and to keep backlash and mesh settings stable during operation. Standard installation is: fasten the mount to the chassis, position the motor using the clamp and cam, then set gear mesh and torque the screws.

Packing includes

  • Motor Mount - 1 pcs
  • Motor Clamp - 1 pcs
  • Aluminum Motor Cam - 1 pcs
  • Spring - 1 pcs
  • 3 x 6mm button head screw - 2 pcs
  • 3 x 12mm button head screw - 1 pcs
  • 3 x 18mm button head screw - 1 pcs
  • 3 x 8mm countersunk screw - 3 pcs

Specifications

  • Item Motor mount assembly
  • Material Aluminum
  • Model Number SD-304DS
  • Compatibility D-Max chassis

Owners of the D-Max chassis will find the SD-304DS useful for achieving a more stable drivetrain layout and quicker reassembly when swapping motors or servicing gearboxes.
Remark :
Due to limited stock availability, please notice that some Yokomo items may have to order from the factory and the ready time is around 4-6 weeks. Customer purchases the item is assumed to accept the waiting time which allows us to order directly from the manufacturer if the item is out of our warehouse.

How does this mount affect gear mesh stability?

By providing a rigid mounting point and repeatable motor positioning via the cam and clamp, the SD-304DS helps maintain consistent gear mesh across runs, reducing the need for frequent adjustments.

Can I fine tune motor position with the cam?

Yes. The separate motor cam allows incremental positioning; set the cam, check mesh under load, and make small adjustments until the desired engagement and noise level are reached.

Does the mount work with different motor sizes?

The clamp system accommodates common motor footprint variations used on the D-Max chassis, but always verify motor height and shaft alignment before final torque.

Any tips for minimizing backlash after installation?

Ensure the mount is fully seated and fasteners torqued evenly, use the cam to lock repeatable position, and run a brief break-in with light loads to let components settle before final mesh tuning.

Copyright © 2008-2026 rcjaz.com.au All rights reserved