AM Honeycomb Chassis Battery Positioning Plate - Arrowmax AM-950043  [AM-950043]

Aftermarket battery plate for AM Honeycomb Chassis

The Arrowmax AM-950043 battery holder set acts as a mounting plate to keep battery packs secured on the AM Honeycomb Chassis. The text below stays practical, covering fit confirmation, step-by-step fitting tips, and the role the holder plays in weight distribution and setup.

This holder is specified for the AM Honeycomb Chassis layout, so inspect tray geometry and the mounting boss pattern before attempting installation. Key checks include aligning screw holes with chassis bosses, ensuring the battery sits flat against the chassis surface, and verifying enough clearance for connectors and cabling away from the ESC or steering components.

Fitting is routine for most builders: set the holder into the battery area, align the fixing holes, and tighten screws evenly in stages to avoid distortion. Use existing chassis fixings; if holes need small alignment tweaks, re-centre the battery and only apply final torque once fit is confirmed. The plate serves as a mounting interface and will determine the battery's exact seating and relation to the chassis centre of gravity.

Even minor battery shifts change the centre of gravity and handling characteristics. Use the holder to tweak fore-aft and lateral placement during setup sessions. When changing cell count or pack type, re-verify clearance and fastening security to prevent pack movement while running.

Arrowmax AM-950043 is an aftermarket battery holder designed for the AM Honeycomb Chassis to improve pack stability and help with setup tuning; confirm fitment before final use.