APC AP11045EP Propeller 11x4.5EP for Electric Pusher Installation  [AP11045EP]

Performance and tuning notes

The APC AP11045EP 11x4.5EP is a propeller intended for electric models in reverse or pusher orientation. Use the diameter and pitch numbers to evaluate expected thrust and load on your motor when selecting a matching prop.

Mounting steps: install the prop on a compatible prop adapter or shaft and secure with the correct spinner or nut hardware. Verify the rotation matches the intended pusher layout and ensure the prop has adequate clearance from the airframe and moving parts to avoid contact during operation.

Tuning guidance: balance the prop before flight to prevent excess vibration, and carry out bench throttle checks under controlled power to observe motor temperature and current draw. Changing prop pitch or diameter affects RPM and torque demand, so tune ESC settings and gearing gradually to achieve smooth handling.

Routine care: keep the hub and threads free of debris, discard any prop showing chips or deformation, and store props flat to avoid bending. Confirm shaft diameter and mount type before buying adapters or spinners for compatibility.