APC AP11080EP Electric 11x8EP Propeller for Reverse/Pusher Use  [AP11080EP]

Mounting, pitch and RPM guidance

The APC AP11080EP propeller is an electric model prop suited to pusher or reverse mounting on RC aircraft. The 11x8 dimensions bias the prop toward higher RPM thrust characteristics rather than strong low-end torque, while the composite construction helps resist flex under load.

Installation notes: make sure shaft diameter and adapter compatibility are confirmed before fitting. Tighten the securing nut to the adapter maker's recommended torque and orient the prop so the blade pitch produces thrust in the planned direction. Perform a rotation check with the ESC and motor before the initial run.

Tuning guidance: diameter and pitch largely determine static thrust and cruising RPM. Use this 11x8 propeller with motors and ESCs rated for higher speeds rather than low-RPM torque builds. Regularly balance the prop and check for nicks to preserve handling and avoid abnormal motor loads.

Safety and maintenance: balance prior to operation, discard props with visible damage, and maintain a safe clearance zone during run-up. Use appropriate locking hardware and thread locker if recommended for your hub or adapter arrangement.