APC AP13065EP Electric 13x6.5EP Propeller for Reverse/Pusher Use  [AP13065EP]

Pusher and reverse propeller description

The APC AP13065EP propeller is intended for electric propulsion where pusher or reverse mounting is required on a model aircraft. The 13x6.5EP marking identifies its diameter and pitch while indicating compatibility with electric pusher orientations.

Installation guidance: mount the prop to the motor shaft with correct rotation direction, tighten hub hardware per your motor and adapter guidance, and verify the blade face and pitch are correct for pusher mounting to produce the desired thrust direction.

Tuning role: changing to this prop size affects motor load, available RPM window and thrust profile. Conduct initial bench runs with a wattmeter to observe current draw and perform static balancing to reduce vibration that could affect servos, ESCs and airframe parts.

Practical notes: always check hub diameter and thread or collet compatibility with your motor, confirm clearance for prop wash and control surfaces on pusher setups, and carry out short low-throttle taxi or glide tests after first installation.