APC AP2210 RC Propeller 22x10 for Electric Fixed-Wing Models  [AP2210]

APC PROPELLER 22x10
Price:
AUD$30.71
Brand:
APC
Model:
AP2210
Condition:
Brand New
Write a review

APC AP2210 22x10: performance and installation

The APC AP2210 22x10 is an RC-scale propeller intended for electric fixed-wing model aircraft. The notes cover practical installation, fitment checks, and how a 22x10 prop alters thrust and RPM characteristics for sport or scale flying. Information is presented in an applied, technical style for model builders and flyers.

The 22x10 code identifies diameter and pitch, which together influence static thrust and cruising RPM. When changing props, verify hub bore and spinner clearance, confirm the shaft is centred, and balance the prop prior to flight to reduce vibration and protect both motor and electronics.

Installation checklist: ensure the prop matches the motor shaft or adapter, secure mounting bolts to the manufacturers' torque recommendations for your gear, and conduct a ground run to confirm smooth operation. On some airframes slight trimming of the backplate or spinner may stop the prop from rubbing at extreme control angles.

Specifications

  • Item Propeller 22x10
  • Material Manufacturer not specified
  • Model Number AP2210
  • Compatibility Intended for RC fixed-wing models requiring 22x10 propellers

The APC AP2210 22x10 is a practical choice for tuning performance on electric fixed-wing models; check hub fit and balance before the first flight to ensure smooth, reliable operation.

How does changing to a 22x10 affect throttle response?

Expect stronger low-end thrust and a lower peak RPM, which can make initial acceleration feel more forceful while reducing top-end revs compared with smaller props.

Should I change motor or ESC when fitting the AP2210?

Not always, but you should check motor and ESC current and thermal limits under a ground run; higher load may require upgraded components depending on your system.

What trimming considerations are common with this size?

If the spinner or backplate rubs at full control, remove small amounts from the interfering part and recheck clearance through the full range of motion.

Any advice for safe first runs with the AP2210?

Before flight, secure the prop, perform a careful ground run while monitoring current and vibration, and keep initial flights conservative to confirm handling and temperatures are acceptable.

Copyright © 2008-2026 rcjaz.com.au All rights reserved