APC AP25125E Electric 25x12.5E Propeller  [AP25125E]

APC PROPELLER 25x12.5E ELECTRIC
Price:
AUD$29.12
Brand:
APC
Model:
AP25125E
Condition:
Brand New
Write a review

Electric Model Aircraft Prop

The APC AP25125E propeller is made for electric model aircraft and comes as an individual replacement for fixed-wing flyers. It fits applications requiring a 25x12.5E specification and is useful when refining thrust and flight response.

Installation uses standard mounting steps: verify the prop hub and spinner fit, secure the blade to the motor or adapter following manufacturer guidance, and run a static balance check before flight. Use correct hardware and torque values suited to your shaft and adapter arrangement.

This prop influences static thrust, the loaded RPM range, and the electrical load on the motor and ESC; monitor temperatures during testing. Remove and replace the prop if you find cracks, deep cuts, or warpage to avoid excess vibration and handling issues.

Specifications

  • Item: Propeller
  • Material: Not specified by manufacturer
  • Model Number: AP25125E
  • Compatibility: Electric RC aircraft and fixed-wing models

Suitable as a spare or tuning option for electric model pilots needing a 25x12.5E prop; always check fit and balance before use.

How should I verify prop security before flight?

Ensure the prop seats fully on the adapter or spinner shoulder, fasteners are tightened evenly to the recommended torque, and perform a short static run to detect any looseness or play.

Will this blade overload my motor or ESC?

Load depends on your motor and battery. Fit the prop and do bench runs while monitoring current draw and temperature; if current is excessively high, choose a smaller or lower-pitch prop.

Best way to detect vibration issues?

Balance the prop statically, check for blade damage, ensure the spinner and hub are true, and run a low-speed test; persistent vibration indicates damage or imbalance that needs correction.

How often should I inspect the prop for wear?

Inspect before each session for nicks or distortion, rebalance after any repair, and replace the prop if any structural damage or permanent warping is found.

Copyright © 2008-2026 rcjaz.com.au All rights reserved