ARRMA Infraction 6S 50T Chrome Steel Spur Gear Compatible MAK050TS by GPM  [MAK050TS]

ARRMA INFRACTION 6S BLX 20 Chrome Steel Spur Gear 50T - 1pc - GPM MAK050TS
Price:
AUD$44.22
Brand:
GPM
Model:
MAK050TS
GTIN:
4894538363845
Condition:
Brand New
Write a review
alt="ARRMA INFRACTION 6S BLX 20 Chrome Steel Spur Gear 50T - 1pc - GPM MAK050TS" title="ARRMA INFRACTION 6S BLX 20 Chrome Steel Spur Gear 50T - 1pc - GPM MAK050TS"

Aftermarket 50T spur for ARRMA 6S vehicles

The MAK050TS 50T spur is an aftermarket replacement suitable for ARRMA 6S machines, produced in 20 chrome steel to stand up to heavy use. It preserves the stock tooth count so gear mesh and the drivetrain alignment are retained, which makes it useful for repairs, maintenance and gearing swaps on off-road and street rigs.

Installation notes: this spur fits adjacent to the motor gear and will replace the original spur without altering pinion spacing when fitted using the factory bearings and mounting hardware. Always inspect mesh and clearance after fitting, and apply thread locker to retaining screws where heavy vibration or load could cause loosening.

Packing includes

  • Spur Gear - 1pcs

Original Name / Part No:

AR310429

Compatible Models

  • ARRMA-1/8 KRATON 6S AR106005/AR106015/AR106018
  • ARRMA-1/8 OUTCAST 6S BLX STUNT TRUCK
  • ARRMA-1/8 4WD ELECTRIC TALION 6S BLX -ARA106048
  • ARRMA-1/8 4WD KRATON 6S BLX SPEED MONSTER TRUCK -ARA106040T1
  • ARRMA-1/8 4WD TYPHON 6S BLX BUGGY (UBC STX2 & BLX 185)-ARA106046
  • ARRMA-1/8 4WD OUTCAST 6S BLX -ARA106060
  • ARRMA-1/7 4WD INFRACTION 6S BLX ALL-ROAD STREET BASH-ARA109001
  • ARRMA-1/7 4WD LIMITLESS ALL-ROAD SPEED BASH-ARA109011
  • ARRMA-1/7 4WD MOJAVE 6S BLX DESERT TRUCK-ARA10058T1/T2
  • ARRMA-1/7 4WD INFRACTION 6S BLX ALL-ROAD TRUCK-ARA7615V2
  • ARRMA-1/7 4WD FIRETEAM TACTICAL UNIT 6S BLX SPEED ASSAULT VEHICLE-ARA7618

For tuners and casual drivers working on ARRMA 6S rigs, this 20 chrome steel 50T spur is a straightforward like-for-like replacement to restore correct tooth count and drivetrain behaviour under load.

Will this change my final drive ratio?

No. Since this is a 50-tooth replacement, the final drive ratio will remain the same when used with the original pinion.

Is the material suitable for 6S power?

Yes. The 20 chrome steel construction offers improved wear resistance and stiffness for high-torque 6S applications.

Any special setup steps?

Fit with the factory hardware and bearings, set correct gear mesh, rotate the drivetrain by hand to check for binding, and use thread locker on fasteners where necessary.

Can I use this on both 1/7 and 1/8 ARRMA models?

Yes. Refer to the Compatible Models list in the specification box to confirm fit with specific 1/7 and 1/8 ARRMA platforms.

Copyright © 2008-2026 rcjaz.com.au All rights reserved