ARRMA MINI KRATON 3S CNC 7075-T6 Rear Shock Tower for Tuning MAKM030 by GPM  [MAKM030]

ARRMA MINI KRATON 3S 7075-T6 Alloy Rear Shock Tower - GPM MAKM030
Price:
AUD$25.62
Brand:
GPM
Model:
MAKM030
GTIN:
4894538413229
Condition:
Brand New
Write a review
alt="ARRMA MINI KRATON 3S 7075-T6 Alloy Rear Shock Tower - GPM MAKM030" title="ARRMA MINI KRATON 3S 7075-T6 Alloy Rear Shock Tower - GPM MAKM030"
alt="ARRMA MINI KRATON 3S 7075-T6 Alloy Rear Shock Tower - GPM MAKM030" title="ARRMA MINI KRATON 3S 7075-T6 Alloy Rear Shock Tower - GPM MAKM030"
alt="ARRMA MINI KRATON 3S 7075-T6 Alloy Rear Shock Tower - GPM MAKM030" title="ARRMA MINI KRATON 3S 7075-T6 Alloy Rear Shock Tower - GPM MAKM030"
alt="ARRMA MINI KRATON 3S 7075-T6 Alloy Rear Shock Tower - GPM MAKM030" title="ARRMA MINI KRATON 3S 7075-T6 Alloy Rear Shock Tower - GPM MAKM030"
alt="ARRMA MINI KRATON 3S 7075-T6 Alloy Rear Shock Tower - GPM MAKM030" title="ARRMA MINI KRATON 3S 7075-T6 Alloy Rear Shock Tower - GPM MAKM030"
alt="ARRMA MINI KRATON 3S 7075-T6 Alloy Rear Shock Tower - GPM MAKM030" title="ARRMA MINI KRATON 3S 7075-T6 Alloy Rear Shock Tower - GPM MAKM030"
alt="ARRMA MINI KRATON 3S 7075-T6 Alloy Rear Shock Tower - GPM MAKM030" title="ARRMA MINI KRATON 3S 7075-T6 Alloy Rear Shock Tower - GPM MAKM030"

CNC-machined rear tower for improved tuning

Built as an aftermarket suspension upgrade for ARRMA MINI KRATON 3S 1/16 models, this rear shock tower is machined from 7075-T6 aluminum to provide a rigid mounting point without significant weight gain.

The tower offers multiple eyelet positions so you can alter shock angle and leverage to change handling balance from more corner bite to quicker rotation. It comes pre-assembled; secure fasteners with medium-strength threadlocker to reduce loosening under hard use.

To install, remove the stock rear tower, mount the shocks in the selected holes, and fasten using the original hardware. Always check that shocks travel freely and that there is no interference before final torque.

Compatible Models

  • ARRMA 1/16 MINI KRATON 3S DSC 4X4 RTR Brushless Speed Truck-ARA2508S
  • ARRMA 1/16 MINI KRATON 3S DSC 4X4 RTR Brushless Speed Truck-ARA2508

This 7075-T6 tower is aimed at drivers who want a stiffer, more tunable rear shock mounting solution without increasing overall vehicle mass.

How does moving the eyelets change handling?

Shifting the shock mount changes leverage and damping effect; lower leverage usually increases stability while higher leverage can quicken body roll and rotation. Test incrementally to find the sweet spot.

Will this reduce chassis flex?

Yes. Replacing the stock plastic tower with a 7075-T6 aluminum part reduces flex at the shock mounting point, giving a firmer response from the rear suspension.

Are shock spacers or shims required?

Most setups use the original shock hardware and spacers; only add shims if you need to correct alignment or preload when changing eyelet positions.

Does it affect vehicle weight significantly?

The tower is engineered to be lightweight for 7075-T6 material, so it improves stiffness with minimal impact on overall vehicle mass for 1/16 scale models.

Should I loctite the screws?

Yes. Apply a medium-strength threadlocker to fasteners to maintain secure attachment under vibration and hard landings.

Is the OEM part number replaced?

Supplier information lists this as a replacement for factory part number ARA-2664, matching the original mounting layout for direct fitment.

Copyright © 2008-2026 rcjaz.com.au All rights reserved