ARRMA Rear Shock 135mm for Notorious 6S - MNV6135R by GPM  [MNV6135R]

Performance Rear Shock for ARRMA (135mm)

The MNV6135R rear shock is an aluminium aftermarket replacement made for ARRMA 1/8 scale platforms requiring a 135mm centre distance. It is intended as a direct-fit option for the ARRMA references shown and focuses on a stiffer shaft, heavier prefill damping and a beefier spring to influence rebound and handling balance.

Highlighted hardware: aluminium 6061-T6 body, 135mm centre distance, and an upgraded 6.0mm shock shaft compared with the quoted 4.0mm original. These shocks ship prefilled with 1000cSt silicone oil for firmer rebound behavior, and the primary spring is 1.9mm wire with spare 1.7mm black springs included for tuning swaps.

Fitment follows normal threaded-top shock practice on 1/8 RTR trucks: confirm eye spacing is 135mm before fitting, swap top or bottom mounts to suit orientation if required, and use medium-strength screw glue on small fasteners where advised to minimise loosening under heavy stunt use. Components arrive pre-assembled but check torque and preload before first operation.

For racers and bashing drivers wanting a firmer rear and improved durability on 1/8 ARRMA rigs, this aluminium shock offers a straightforward upgrade with heavier damping and alternate spring choices; verify mounting fit and begin with conservative preload settings before tuning further.