Arrowmax AM-200156 3x9x2.5mm Flanged Ball Bearing Pair  [AM-200156]

Arrowmax AM-200156 Ball Bearing Flanged 3*9*2.5 (2)
Price:
AUD$11.60
Brand:
Arrowmax
Model:
AM-200156
Condition:
Brand New
Write a review

Reliable 3x9x2.5mm Flanged Bearings for RC Maintenance

Arrowmax AM-200156 flanged ball bearings come in the common 3x9x2.5mm format to support rotating parts in cars and trucks. The pair is aimed at hobbyists who carry out frequent servicing or swap-outs at the track.

Track and Off-Road Fitment Notes

The flange helps lock the bearing against its mounting face, which reduces side play when driving over bumps or rough terrain. They are a good match for many standard hubs and gearbox housings used in off-road setups.

Why Arrowmax Bearings Are Practical

These bearings offer consistent dimension control to lower friction and protect mating components, delivering reliable service life when cleaned and lubricated as part of routine care.

What electronics or gearing affect bearing choice?

Higher torque motors and aggressive gearing increase loads on bearings; choose appropriately rated bearings and inspect them more often when running high-power setups.

Can these bearings handle wet or dusty conditions?

They will work in varied conditions but should be cleaned and relubricated more frequently in wet or dusty environments to prevent premature wear.

How do I check a bearing for replacement?

Spin the bearing by hand and feel for roughness, listen for noise, and check for side play; replace if you detect rough rotation or looseness to avoid damaging other parts.

Is a press tool necessary to fit these bearings?

A proper press or bearing driver makes installation safer and more accurate, but careful hand pressing with aligned tools can work for hobbyists on small parts.

Copyright © 2008-2025 rcjaz.com.au All rights reserved