Arrowmax AM-220018-O 1.8mm Long Drill for Mini 4WD Workshop [AM-220018-O]

Arrowmax AM-220018-O Drill 1.8MM Long For 1/32 Mini 4WD (Orange)

Price:

AUD$19.28

Brand:

Arrowmax

Model:

AM-220018-O

Not Available

Please kindly input your name and email address, we will inform you once we have the restocking.

Or you may find similar product under the

Mini 4WD / Kids - Mini 4WD Series - Set-up Tools

Extended Reach 1.8mm Drill for Mini 4WD Kits

The Arrowmax AM-220018-O 1.8mm long drill provides the extra length needed to access recessed screw holes and fiddly mounting points on Tamiya Mini 4WD 1/32 cars. Its longer flute makes it easier to work in narrow spots while the orange colour keeps it visible on a bench full of gear. It is handy for builders doing setup work, light upgrades, and careful modifications.

What surfaces can I drill with this bit?

Best for model plastics like ABS and styrene, and light metals if you use low speed and steady pressure. Avoid forcing the bit through very hard materials to keep the tip intact.

Are there recommended techniques for cleaner holes?

Start with a centre punch or pilot mark, hold the part securely, and use short pecks rather than constant pressure. Back the bit out occasionally to clear debris.

How do I choose complementary drill sizes?

Use 1.5mm or 2.0mm sizes nearby for pilot or clearance holes depending on pin or screw diameter. Match the hole to the fastener for a snug fit without splitting the material.

Can this be used for display model detailing?

Yes. Its length and finer diameter make it useful for small detailing tasks where access is limited, such as mounting tiny fixtures or running small wiring through bodywork.

Hot Brands