ARS Linkage Mount for Auper D6 SAK-D6808D/PU Purple Aluminum by 3Racing  [SAK-D6808D/PU]

3RACING Auper D6 Aluminum ARS Linkage Mount Purple - SAK-D6808D/PU
Price:
AUD$14.31
Brand:
3Racing
Model:
SAK-D6808D/PU
Condition:
Brand New
Write a review

Purple Anodized ARS Link for Auper D6

The SAK-D6808D/PU is an aluminum ARS linkage mount made for the Auper D6 platform with a purple anodized finish. It swaps in for the stock plastic mounting point to provide a stiffer pivot and consistent seating for steering and suspension linkages.

Installation is simple on Auper D6-layout chassis, using the original mounting holes and standard fasteners. When installing, check the ball link geometry and run the suspension through full travel to confirm there is no binding prior to final torque.

Setup note: changing to an aluminum mount shifts how linkage geometry reacts during cornering, often sharpening steering response and making adjustments more repeatable. Introduce it alongside other small setup changes for best results.

How should I adjust my setup after fitting this mount?

Start with small steps: restore baseline settings, then tighten steering increments as needed while testing handling on track. Record changes to compare effects.

Does this affect ARS tuning range?

The mount itself does not change the ARS range but changes how geometry reacts, so you may notice different steering sensitivity at the same ARS setting.

Any tips for evaluating changes on track?

Make one change at a time and run multiple laps to assess consistency. Compare lap times and driver feel rather than relying on a single run.

Copyright © 2008-2026 rcjaz.com.au All rights reserved