Auper D6 Front Bumper Aluminium Upgrade SAK-D6804/PU Purple Anodized by 3Racing  [SAK-D6804/PU]

Aluminium front assembly notes

Model SAK-D6804/PU is a purple-anodized aluminium front bumper engineered for the Auper D6 mounting layout. It replaces the standard plastic piece to give a firmer interface for front-end components and setup adjustments.

Role and tuning relevance: Installing a metal bumper shifts how forces are routed into the chassis, which can influence turn-in, mid-corner grip, and how steering feedback is perceived. Tuners may find different balance points after swapping to a stiffer mount.

Installation notes: The bumper lines up with the Auper D6 factory front holes and is usually fitted with the existing fasteners. Fit the part, confirm clearances around steering parts, then secure fasteners evenly to retain alignment.

Maintenance and service: Anodized aluminium reduces corrosion risk, but periodic checks for loose screws and wear at contact points are recommended. Use a suitable thread locker on steel-to-aluminium joints when necessary and avoid excess torque on soft threads.

Suited to drivers and builders looking to fine tune front-end behaviour on the Auper D6 by replacing the stock plastic mount with a rigid aluminium option.