Awesomatix A12X Suspension Plate X - 3.0mm Graphite Tuning Plate O-ACPP01 by Factory Pro  [FP-O-ACPP01]

This Factory Pro aftermarket suspension plate is intended for the Awesomatix A12X platform as a direct-fit graphite top plate for front or rear suspension stacks depending on chassis setup. The 3.0mm graphite offers a deliberate stiffness step while maintaining mass appropriate for 1/12 scale touring cars.

Because fit is controlled by the A12X hole pattern and geometry, most installations reuse the stock screws and spacers. Check hole alignment and clearance areas before final torquing to confirm the plate does not contact nearby parts such as servo arms or shock mounts.

In setup terms, swapping plate thickness or material tunes the local stiffness inside the suspension stack and can change transient handling and roll balance without altering suspension geometry. This plate targets drivers wanting a predictable stiffness change while keeping factory mounting positions intact.