AX10 Scorpion M6x55 Turnbuckle Threaded Link AX10-21/GR by 3Racing  [AX10-21/GR]

AXIAL AX10 Scorpion Chassis Turnbuckle M6x55 - 3RACING AX10-21/GR
Price:
AUD$17.89
Brand:
3Racing
Model:
AX10-21/GR
Condition:
Brand New
Write a review

M6x55 Turnbuckle for AX10 Scorpion

This M6x55 turnbuckle is designed for the AX10 Scorpion chassis and carries the part code AX10-21/GR. It serves as a threaded replacement rod for steering and suspension linkages on scale crawler rigs that use the AX10 Scorpion platform.

The link lets you alter overall length to correct toe, caster and ride-height relationships without modifying other components. Fit it when a straight threaded M6x55 link is required to set or repair geometry, and always double-check thread size and length before installation to ensure correct fit with your rod ends or studs.

Installation guidance: screw the M6x55 rod into the mating rod ends or ball studs until seating reliably, balance adjustments side to side, and inspect static alignment before first use. Make small incremental changes to refine steering feedback and suspension behaviour while keeping sufficient thread engagement.

Do I need special tools to fit this turnbuckle?

Basic hand tools are sufficient for most installs. Use suitable pliers or spanner on lock nuts if present, and avoid over-torquing to protect threads and ball studs.

Will this affect ground clearance?

Changing link length can change ride height and thus ground clearance. Make measured changes and check full travel to ensure no binding or interference.

Is side-to-side symmetry important?

Yes, matching length on both sides preserves predictable steering and prevents pull or uneven wear. Always set both links equally during setup.

Copyright © 2008-2026 rcjaz.com.au All rights reserved