Axial 1/6 SCX6 Aluminum Front Shock Mount JR-SCX603-BK by Jazrider  [JR-SCX603-BK]

Axial 1/6 SCX6 Jeep Aluminum Front Shock Tower Set (Black)
Price:
AUD$37.21
Brand:
JAZRIDER
Model:
JR-SCX603-BK
Condition:
Brand New
Write a review

SCX6 Front Shock Mount Specifications

This RC front shock tower is intended for Axial 1/6 SCX6 Jeep models and carries the part number JR-SCX603-BK. Constructed from black-finished aluminum, it upgrades the stock plastic tower to offer a stiffer attachment for shocks and suspension links.

The design centralizes front suspension loads to help maintain alignment and limit flex during technical driving. Before installing, compare the tower with your servo mounts and shock geometry to ensure compatibility.

Specifications

  • Item: Front shock tower set
  • Material: Aluminum
  • Model Number: JR-SCX603-BK
  • Compatibility: Axial SCX6 Jeep JLU Wrangler 4WD

Fit this aluminum tower when you want firmer front suspension mounting for tuning or to replace a broken stock unit; verify link and shock clearances during installation.

Will this stiffer mounting mean I must change shock valving?

Because aluminum raises mounting stiffness, you may notice different feedback; some users fine-tune valving or spring rates to suit the firmer mount for improved control.

How resilient is the black finish on impacts?

The black finish offers basic surface protection, but inspect for dents or nicks after hard impacts and replace if structural damage appears around mounting holes.

Can this tower be repaired after a crack?

Aluminum with a cracked mounting hole should be replaced rather than repaired to preserve safe suspension mounting; inspect frequently after heavy use.

Will using this change axle articulation much?

The tower reduces unwanted flex at the front, which can slightly alter articulation; evaluate articulation on a suspension check and adjust links if needed.

Copyright © 2008-2026 rcjaz.com.au All rights reserved