Axial AX10 Deadbolt Steering Upgrade Link AX10-24002-OR by Jazrider  [AX10-24002-OR]

AX10 Deadbolt orange aluminum steering linkage

This orange anodized aluminum steering linkage is manufactured for use on the Axial AX10 Deadbolt chassis and serves as a replacement for the standard plastic link. It creates a rigid mechanical link between the servo and steering knuckles for scale driving and tuning tasks.

Compatibility is restricted to the Axial AX10 Deadbolt as named; other platform compatibility is not indicated. The component installs as a drop-in replacement for hobbyists performing routine maintenance or upgrades.

Fitting guidance: verify thread engagement and ensure rod ends seat flush in the knuckle sockets. Adjust tie-rod lengths with the wheels straight to achieve neutral toe and re-check servo centring. Refrain from over-tightening fasteners to protect plastic threadmates.

Impact on setup: the stiffer aluminum link helps stabilise steering geometry during crawling and trials, improving consistency when tuning servo endpoints or steering throw.

Servicing: monitor ball joints and rod ends for play and inspect the finish after hard impacts; replace the linkage if joint wear compromises steering precision.