AXIAL AX24 XC-1 49mm Front/Rear Shock Set Tunable - AX24049FR by GPM  [AX24049FR]

49mm front and rear shocks for AX24 XC-1

This 49mm damper set fits the AXIAL AX24 XC-1 platform and is built from Aluminum 6061-T6 to match standard AX24 shock mounting points. The dampers are intended to reduce friction inside the body and to absorb low-speed impacts for steadier crawling over rough obstacles.

Adjustments are made with the top spring retainer to change spring preload and effective stiffness, enabling a range of tuning for different driving styles. The installed black springs use the original wire diameter and the kit supplies four 0.35mm silver replacement springs for finer tuning of spring rate.

Hardware supplied includes the cap head screws needed for mounting along with the replacement springs to swap rates. They can be fitted to either front or rear damper locations on the AX24 XC-1 chassis; check fitment and clearances before securing installations.

Fit these 49mm aluminum dampers to dial in axle articulation and spring behaviour on a 1/24 AX24 XC-1 crawler, using the top retainer and spare springs to achieve preferred handling.