This RC aluminium spur gear adapter and 56T steel spur is designed for use on selected AXIAL platforms. The assembly replaces the original spur and adapter so you can swap to steel or renew the drivetrain interface without changing the gearbox case.
The package contains the small screws and collars needed to fasten the adapter to typical pinions and spur assemblies. Installation requires opening the gearbox and standard tools; check pinion mesh and clearance before test running. The part is intended for model tuning and repair, not for real world vehicles.
Included in the kit: 3x6 stainless steel button head screws (3 pcs), 4mm stainless steel lock nut (1 pc), Pellerin collars (1 pc), steel post (1 pc), and the aluminium adapter with the 56T steel spur gear.
Use this combination to repair worn gears or change to a steel spur for different durability; always verify mesh and carry out a short break-in at low load.
Copyright © 2008-2026 rcjaz.com.au All rights reserved
