Axial Racing Wraith Aluminum C Hub Carrier - Direct Upgrade AW-23012-S by Jazrider  [AW-23012-S]

This silver-finished aluminum C hub carrier is intended for the Axial Racing Wraith platform and may be used as a scale replacement or an upgrade for harsher off-road use. It serves as the steering knuckle mount on the front suspension and replaces more fragile plastic hubs.

As a direct-fit component for Wraith chassis configurations, it keeps the same fixing points and wheel hex orientation, so installation does not require axle modifications while increasing wear resistance for trail and rock crawling.

Fitment advice: ensure correct left/right orientation, reuse original hardware only if in good condition, and confirm unobstructed hub rotation after tightening. Update steering endpoints and toe settings where needed to retain the intended handling profile.

Care and tuning: recheck screws after the first sessions, inspect for any binding at the knuckle interface, and maintain bearings and pins routinely. The switch to aluminum can alter steering feel slightly, so expect to fine-tune steering and suspension settings after the upgrade.