Axial Racing Wraith Compatible Hex Wheel Hub, 5mm Wider Offset - AW-23025-GR by Jazrider  [AW-23025-GR]

Axial Racing Wraith Aluminum Hex. Wheel Hub / 5mm Wider (Green)
Price:
AUD$4.32
Brand:
JAZRIDER
Model:
AW-23025-GR
Condition:
Brand New
Write a review

Technical Notes: Hex Wheel Hub

The AW-23025-GR aluminum hex wheel hub is an alloy replacement made to work with the Axial Racing Wraith platform. Coated green, it replaces the stock hub and shifts the wheel mounting 5mm outward to free up clearance without changing axle hardware.

Use this hub to broaden track width or accommodate larger tyres for better obstacle clearance on trail and crawl courses. The machined alloy construction yields a stiffer attachment point than plastic pieces, helping preserve wheel alignment during heavy loads.

Fitting is straightforward: remove the factory hub, migrate bearings or pins if required, and refit using the original wheel fasteners. Always verify wheel nut torque and run the suspension through full travel to ensure no binding occurs.

Will the wider offset affect axle geometry or tuning?

A wider offset changes track width and can alter handling balance; expect slightly increased stability but review steering feel and adjust shocks or toe settings if needed for tuning.

Can I fit larger tyres with this hub?

Yes—the 5mm outward offset creates extra clearance for bigger tyres, but always check for rubbing across full suspension articulation before committing to a run.

Does this require special wheel nuts or spacers?

In most setups the existing wheel retaining hardware will work. Inspect thread engagement and consider slightly longer nuts only if clearance or engagement is insufficient.

Copyright © 2008-2026 rcjaz.com.au All rights reserved